Difference between revisions of "2010 AMC 10A Problems/Problem 17"
Flamedragon (talk | contribs) (→Solution) |
|||
| Line 4: | Line 4: | ||
<math>\textbf{(A)}\ 7 \qquad \textbf{(B)}\ 8 \qquad \textbf{(C)}\ 10 \qquad \textbf{(D)}\ 12 \qquad \textbf{(E)}\ 15</math> | <math>\textbf{(A)}\ 7 \qquad \textbf{(B)}\ 8 \qquad \textbf{(C)}\ 10 \qquad \textbf{(D)}\ 12 \qquad \textbf{(E)}\ 15</math> | ||
| − | + | == Solution 1 == | |
| − | |||
| − | |||
Imagine making the cuts one at a time. The first cut removes a box <math>2\times 2\times 3</math>. The second cut removes two boxes, each of dimensions <math>2\times 2\times 0.5</math>, and the third cut does the same as the second cut, on the last two faces. Hence the total volume of all cuts is <math>12 + 4 + 4 = 20</math>. | Imagine making the cuts one at a time. The first cut removes a box <math>2\times 2\times 3</math>. The second cut removes two boxes, each of dimensions <math>2\times 2\times 0.5</math>, and the third cut does the same as the second cut, on the last two faces. Hence the total volume of all cuts is <math>12 + 4 + 4 = 20</math>. | ||
| Line 12: | Line 10: | ||
Therefore the volume of the rest of the cube is <math>3^3 - 20 = 27 - 20 = \boxed{7\ \textbf{(A)}}</math>. | Therefore the volume of the rest of the cube is <math>3^3 - 20 = 27 - 20 = \boxed{7\ \textbf{(A)}}</math>. | ||
| − | + | == Solution 2 == | |
We can use [[Principle of Inclusion-Exclusion]] to find the final volume of the cube. | We can use [[Principle of Inclusion-Exclusion]] to find the final volume of the cube. | ||
| Line 23: | Line 21: | ||
Therefore the volume of the rest of the cube is <math>3^3 - 20 = 27 - 20 = \boxed{7\ \textbf{(A)}}</math>. | Therefore the volume of the rest of the cube is <math>3^3 - 20 = 27 - 20 = \boxed{7\ \textbf{(A)}}</math>. | ||
| − | + | == Solution 3 == | |
We can visualize the final figure and see a cubic frame. We can find the volume of the figure by adding up the volumes of the edges and corners. | We can visualize the final figure and see a cubic frame. We can find the volume of the figure by adding up the volumes of the edges and corners. | ||
Revision as of 22:57, 12 February 2014
Problem
A solid cube has side length 3 inches. A 2-inch by 2-inch square hole is cut into the center of each face. The edges of each cut are parallel to the edges of the cube, and each hole goes all the way through the cube. What is the volume, in cubic inches, of the remaining solid?
Solution 1
Imagine making the cuts one at a time. The first cut removes a box 
. The second cut removes two boxes, each of dimensions 
, and the third cut does the same as the second cut, on the last two faces. Hence the total volume of all cuts is 
.
Therefore the volume of the rest of the cube is 
.
Solution 2
We can use Principle of Inclusion-Exclusion to find the final volume of the cube.
There are 3 "cuts" through the cube that go from one end to the other. Each of these "cuts" has 
cubic inches. However, we can not just sum their volumes, as
the central 
cube is included in each of these three cuts. To get the correct result, we can take the sum of the volumes of the three cuts, and subtract the volume of the central cube twice.
Hence the total volume of the cuts is 
.
Therefore the volume of the rest of the cube is .
Solution 3
We can visualize the final figure and see a cubic frame. We can find the volume of the figure by adding up the volumes of the edges and corners.
Each edge can be seen as a 
box, and each corner can be seen as a 
box.
.
See also
| 2010 AMC 10A (Problems • Answer Key • Resources) | ||
| Preceded by Problem 16 |
Followed by Problem 18 | |
| 1 • 2 • 3 • 4 • 5 • 6 • 7 • 8 • 9 • 10 • 11 • 12 • 13 • 14 • 15 • 16 • 17 • 18 • 19 • 20 • 21 • 22 • 23 • 24 • 25 | ||
| All AMC 10 Problems and Solutions | ||
The problems on this page are copyrighted by the Mathematical Association of America's American Mathematics Competitions. 
