Getting Started With Python Programming

Revision as of 22:26, 28 November 2015 by PiDude314 (talk | contribs) (Undo revision 73285 by Wangbaby2004 (talk))

This guide takes you through the process of getting started with programming using the Python programming language. The sections flow from one to the next so it's recommended to read through this document in order from top to bottom.

Installing Python

Python is a very useful and popular computer language. Confusingly, Python has two major versions (2 and 3) and they are not fully compatible. We recommend using the most recent release of version 3. (This is the version that our Introduction to Programming with Python course uses -- if you are enrolled in that class, you must have Python 3.) There is absolutely nothing wrong with Python 2, as it is what most of today's technology supports and uses, but Python 3 is well on the way of replacing Python 2, so it will be more useful in a few years.

Python is open-source software and is free to install and use. Here are installation instructions:

  1. Go to the Python download page at http://www.python.org/download. Near the top of the page, there will be a list of download links for the Python 3.5.* installer. (The * will be replaced by a number -- as of mid-September 2015 the version is 3.5.0.) Click on the link that corresponds to your computer type (Windows or Mac, 32-bit or 64-bit -- if you're not sure, use the 32-bit version.) Some browsers will save the file automatically, others may pop up a box asking you if you want to save the file, in which case you should click the "save file" option. Depending on how your browser is configured, you may be asked where to save the file. If this is the case, keep track of where you save the installer.
  2. Find where the installer was downloaded and double click on it to run it. On most browsers, you should simply be able to double-click the installer from the browser's "Downloads" window or menu. You may also have to click "Run" or "Yes" to a security window -- do this if necessary.
  3. The setup wizard should launch. You should just click "Next" for every option in the setup wizard (i.e. use the defaults), unless you have some specific reason not to.
  4. Familiarize yourself with the Python shell and IDLE text editor by running through the two sections below.

Using the Python Shell

The program that you'll use to run Python is called IDLE. It may be listed on your computer as "IDLE (Python GUI)".

  • On a Mac, IDLE should be in the Applications folder.
  • On Windows, IDLE should be accessible from the Start menu in a folder named "Python z5" (or something similar).

The icon for IDLE looks something like this Idleicon.png or this Idleiconmac.png

When you first open IDLE, you'll see the Python Shell (the numbers on your shell might be different than those shown below):

Idle2-1.png

(The screenshots in this article are taken using IDLE on a Mac with the font increased. Thus IDLE may look a little bit different for you but should still function similarly.)

Note that the first line is the version of Python, which is 3.1.2 in the screenshot but should be 3.5.something if you installed it as directed above. Another thing to note is that in the lower right hand corner of the Python Shell you can see that it says "Ln: 4 Col: 4". This is just telling you where in the document your cursor is. In this case it's on line 4 and over in column 4. (The line and column number may be slightly different for your installation.)

When you first start up Python on a Mac, you might get the following warning:

>>> WARNING: The version of Tcl/Tk (8.5.9) in use may be unstable.
Visit http://www.python.org/download/mac/tcltk/ for current information.

If you get this warning, you'll need to update a graphics driver on your computer. Follow the link shown above and download and install the ActiveTcl driver that's recommended for the version of OS X that your Mac is running. This most likely will be 8.5.15.0, which you can also download directly from http://www.activestate.com/activetcl/downloads (IMPORTANT: you only need to do this step if you get the warning printed above when you start IDLE for the first time. If you don't get the warning, then everything is good to go.)


The Python Shell is very useful for quick math and short sequences of commands:

Idle2-2.2.png

Here we see a number of familiar operations: + for addition, - for subtraction, * for multiplication, and / for division. The last operation shown in the example, denoted by **, happens to be exponentiation. One neat feature to note about Python is that it can store arbitrarily large numbers (limited by the amount of memory your computer has). Trying some hefty exponentiation, we can see that we can compute with some pretty big numbers such as $2^{1000}$ as illustrated below.

Idle2-3.png

While Python can make for a pretty good calculator, it can do a whole lot more. One example is when dealing with strings as follows:

Idle2-4.png

Here we are concatenating the three strings "python", "is", and "cool" by using the + operator. Notice that previously we used + to add numbers but now with strings, Python concatenates them! You may also note that the output of the operation gives us a string with single quotes around it. In Python, you are able to use single quotes or double quotes to denote a string. You can use them interchangeably.

As a final example, we can even write code in the Python Shell that extends beyond a single line as shown below. We also see our first example of a $\verb=for=$ loop.

Idle2-5.png

As you type the above, the Python Shell will automatically indent the second line for you. To let the Python Shell know that you're done and are ready for it to run your code, you'll need to put in an extra blank line by hitting the Enter key again. At that point it should run your code and print your output.

Take some time to play around with the Python Shell. You'll want to go through a more extensive introduction to programming to learn the full extent of what you can do with Python, but you can still do some pretty nifty stuff by just playing around. The Python Shell also has an extensive built-in help system -- just type help() at the ">>>" prompt to get started and then follow the instructions it gives you.

The IDLE Text Editor and Your First Python Program

For most programming needs, you'll want to edit your program in a separate document and then run it. Happily, IDLE comes with its own built-in text editor.

To get started, go to the File menu of the Python Shell and click on "New Window". This should give you a blank document with the title "Untitled" as shown below:

Idle2-6.png

You'll need to save your file before running it, so you might as well save it now. Make sure that you name your file with a name that ends in .py, so that your computer knows it is a Python program. Here we save ours as test.py:

Idle2-7.png

To get acquainted with the text editor, let's write our first Python program! Let's write a program to the following task:

Find the sum of all the positive multiples of 3 below 1000.

We solve this by keeping a running total: we'll start with the smallest positive multiple of 3 and go up one multiple at a time keeping track of the sum, stopping once we hit 1000. We can do this with the following code:

Idle2-8.png

Notice that as you type the above code, the keywords ("while" and "print") will automatically get colored -- this makes the code easier to read. Also, after typing the line "while i < 1000:", the editor will automatically start indenting for you. When you get to the line "print(total)", you'll need to use the backspace key to remove the indentation. It is important that the code look exactly like it does in the screenshot above: in Python, proper indentation is very important!

This program basically works by incrementing $\verb=i=$ by 3 every time and adding it to the $\verb=total=$. The $\verb%+=%$ notation might be intimidating at first. However, the statement $\verb%i+=3%$ is just a shorthand for $\verb%i = i + 3%$.

Now that we've written this code, we probably want to run it and test it out. We can do so by going to the Run menu and hitting Run Module (shortcut F5). The program should execute and print out the answer to the Python Shell:

Idle2-9.png

The RESTART line just means that Python is clearing all the work you've previously done before it starts running your program. Then, the program runs and we get our answer, 166833. If instead you get an error message or a different answer, check that your program exactly matches the screenshot above, and try it again.

What's Next?

Now that you've learned the very basics of getting Python going, there's a bunch of tutorials you can look at which are listed on the Python website. Go check them out!