Difference between revisions of "1965 AHSME Problems/Problem 39"
(fgsfgsdfbhsthh) |
Tecilis459 (talk | contribs) (Add problem statement) |
||
| Line 1: | Line 1: | ||
| − | + | == Problem == | |
| − | + | ||
| − | + | A foreman noticed an inspector checking a <math>3</math>"-hole with a <math>2</math>"-plug and a <math>1</math>"-plug and suggested that two more gauges | |
| + | be inserted to be sure that the fit was snug. If the new gauges are alike, then the diameter, <math>d</math>, of each, to the nearest hundredth of an inch, is: | ||
| + | |||
| + | <math>\textbf{(A)}\ .87 \qquad | ||
| + | \textbf{(B) }\ .86 \qquad | ||
| + | \textbf{(C) }\ .83 \qquad | ||
| + | \textbf{(D) }\ .75 \qquad | ||
| + | \textbf{(E) }\ .71 </math> | ||
Revision as of 13:55, 16 July 2024
Problem
A foreman noticed an inspector checking a 
"-hole with a 
"-plug and a 
"-plug and suggested that two more gauges
be inserted to be sure that the fit was snug. If the new gauges are alike, then the diameter, 
, of each, to the nearest hundredth of an inch, is:
