# Difference between revisions of "2008 AMC 12A Problems/Problem 22"

The following problem is from both the 2008 AMC 12A #22 and 2008 AMC 10A #25, so both problems redirect to this page.

## Problem

A round table has radius $4$. Six rectangular place mats are placed on the table. Each place mat has width $1$ and length $x$ as shown. They are positioned so that each mat has two corners on the edge of the table, these two corners being end points of the same side of length $x$. Further, the mats are positioned so that the inner corners each touch an inner corner of an adjacent mat. What is $x$?

$[asy]unitsize(4mm); defaultpen(linewidth(.8)+fontsize(8)); draw(Circle((0,0),4)); path mat=(-2.687,-1.5513)--(-2.687,1.5513)--(-3.687,1.5513)--(-3.687,-1.5513)--cycle; draw(mat); draw(rotate(60)*mat); draw(rotate(120)*mat); draw(rotate(180)*mat); draw(rotate(240)*mat); draw(rotate(300)*mat); label("$$x$$",(-1.55,2.1),E); label("$$1$$",(-0.5,3.8),S);[/asy]$

$\mathrm{(A)}\ 2\sqrt{5}-\sqrt{3}\qquad\mathrm{(B)}\ 3\qquad\mathrm{(C)}\ \frac{3\sqrt{7}-\sqrt{3}}{2}\qquad\mathrm{(D)}\ 2\sqrt{3}\qquad\mathrm{(E)}\ \frac{5+2\sqrt{3}}{2}$

## Solution

### Solution 1 (trigonometry)

Let one of the mats be $ABCD$, and the center be $O$ as shown:

$[asy]unitsize(8mm); defaultpen(linewidth(.8)+fontsize(8)); draw(Circle((0,0),4)); path mat=(-2.687,-1.5513)--(-2.687,1.5513)--(-3.687,1.5513)--(-3.687,-1.5513)--cycle; draw(mat); draw(rotate(60)*mat); draw(rotate(120)*mat); draw(rotate(180)*mat); draw(rotate(240)*mat); draw(rotate(300)*mat); label("$$x$$",(-1.55,2.1),E); label("$$x$$",(0.03,1.5),E); label("$$A$$",(-3.6,2.5513),E); label("$$B$$",(-3.15,1.35),E); label("$$C$$",(0.05,3.20),E); label("$$D$$",(-0.75,4.15),E); label("$$O$$",(0.00,-0.10),E); label("$$1$$",(-0.1,3.8),S); label("$$4$$",(-0.4,2.2),S); draw((0,0)--(0,3.103)); draw((0,0)--(-2.687,1.5513)); draw((0,0)--(-0.5,3.9686));[/asy]$

Since there are $6$ mats, $\Delta BOC$ is equilateral. So, $BC=CO=x$. Also, $\angle OCD = \angle OCB + \angle BCD = 60^\circ+90^\circ=150^\circ$.

By the Law of Cosines: $4^2=1^2+x^2-2\cdot1\cdot x \cdot \cos(150^\circ) \Rightarrow x^2 + x\sqrt{3} - 15 = 0 \Rightarrow x = \frac{-\sqrt{3}\pm 3\sqrt{7}}{2}$.

Since $x$ must be positive, $x = \frac{3\sqrt{7}-\sqrt{3}}{2} \Rightarrow C$.

### Solution 2 (without trigonometry)

Draw $OD$ and $OC$ as in the diagram. Draw the altitude from $O$ to $DC$ and call the intersection $E$

$[asy]unitsize(8mm); defaultpen(linewidth(.8)+fontsize(8)); draw(Circle((0,0),4)); path mat=(-2.687,-1.5513)--(-2.687,1.5513)--(-3.687,1.5513)--(-3.687,-1.5513)--cycle; draw(mat); draw(rotate(60)*mat); draw(rotate(120)*mat); draw(rotate(180)*mat); draw(rotate(240)*mat); draw(rotate(300)*mat); label("$$x$$",(-1.55,2.1),E); label("$$x$$",(0.03,1.5),E); label("$$A$$",(-3.6,2.5513),E); label("$$B$$",(-3.15,1.35),E); label("$$C$$",(0.05,3.20),E); label("$$D$$",(-0.75,4.15),E); label("$$O$$",(0.00,-0.10),E); label("$$1$$",(-0.1,3.8),S); label("$$4$$",(-0.4,2.2),S); draw((0,0)--(0,3.103)); draw((0,0)--(-2.687,1.5513)); draw((0,0)--(-0.5,3.9686));[/asy]$

As proved in the first solution, $\angle OCD = 150^\circ$. That makes $\Delta OCE$ a $30-60-90$ triangle, so $OE = \frac{x}{2}$ and $CE= \frac{x\sqrt 3}{2}$

Since $\Delta OED$ is a right triangle, $\left({\frac{x}{2}}\right)^2 + \left({\frac{x\sqrt 3}{2} +1}\right)^2 = 4^2 \Rightarrow x^2+x\sqrt3-15 = 0$

Solving for $x$ gives $x =\frac{3\sqrt{7}-\sqrt{3}}{2}\Rightarrow C$