2016 AMC 10B Problems/Problem 20

Revision as of 11:57, 28 February 2024 by Meeshbot (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Problem

A dilation of the plane—that is, a size transformation with a positive scale factor—sends the circle of radius $2$ centered at $A(2,2)$ to the circle of radius $3$ centered at $A’(5,6)$. What distance does the origin $O(0,0)$, move under this transformation?

$\textbf{(A)}\ 0\qquad\textbf{(B)}\ 3\qquad\textbf{(C)}\ \sqrt{13}\qquad\textbf{(D)}\ 4\qquad\textbf{(E)}\ 5$

Solution 1: Algebraic

The center of dilation must lie on the line $A A'$, which can be expressed as $y = \dfrac{4x}{3} - \dfrac{2}{3}$. Note that the center of dilation must have an $x$-coordinate less than $2$; if the $x$-coordinate were otherwise, then the circle under the transformation would not have an increased $x$-coordinate in the coordinate plane. Also, the ratio of dilation must be equal to $\dfrac{3}{2}$, which is the ratio of the radii of the circles. Thus, we are looking for a point $(x,y)$ such that $\dfrac{3}{2} \left( 2 - x \right) = 5 - x$ (for the $x$-coordinates), and $\dfrac{3}{2} \left( 2 - y \right) = 6 - y$. We do not have to include absolute value symbols because we know that the center of dilation has a lower $x$-coordinate, and hence a lower $y$-coordinate, from our reasoning above. Solving the two equations, we get $x = -4$ and $y = - 6$. This means that any point $(a,b)$ on the plane will dilate to the point $\left( \dfrac{3}{2} (a + 4) - 4, \dfrac{3}{2} (b + 6) - 6 \right)$, which means that the point $(0,0)$ dilates to $\left( 6 - 4, 9 - 6 \right) = (2,3)$. Thus, the origin moves $\sqrt{2^2 + 3^2} = \boxed{\sqrt{13}}$ units.

Solution 2: Geometric

[asy] /* Geogebra to Asymptote conversion, documentation at artofproblemsolving.com/Wiki, go to User:Azjps/geogebra */ /* by adihaya */ import graph; size(13cm);  real labelscalefactor = 0.5; /* changes label-to-point distance */ pen dps = linewidth(0.7) + fontsize(10); defaultpen(dps); /* default pen style */ real xmin = -7., xmax = 9., ymin = -7., ymax = 9.6;  /* image dimensions */ pen xdxdff = rgb(0.49019607843137253,50.49019607843137253,1.); pen uuuuuu = rgb(0.666666666,0.26666666666666666,0.26666666666666666); pen qqzzff = rgb(0.,0.6,1.); pen ffwwqq = rgb(1.,0.4,0.); pen qqwuqq = rgb(0.,0.39215686274509803,0.);  pair O = (3.,0.), A = (2.,2.), B = (2.,1.), C = (4.203155585,5.592712848525), D = (5.,4.), F = (-3.999634206191805,-5.999512274922407), G = (-3.999634206191812,-5.9995122749224175);  /* by adihaya */ draw((2.482656878,0.)---(4.482568783,0.48268779)--(2.,0.48272202065687797)--B--cycle, qqwuqq);  draw((5.482722020656878,0.)--(7.4827220878,1.48277797)--(5.,0.48272687797)--(5.,0.)--cycle, qqwuqq);  Label laxis; laxis.p = fontsize(10);  xaxis(xmin, xmax, Ticks(laxis, Step = 2., Size = 2, NoZero),EndArrow(6), above = true);  yaxis(ymin, ymax, Ticks(laxis, Step = 2., Size = 2, NoZero),EndArrow(6), above = true); /* draws axes; NoZero hides '0' label */   /* draw figures */ draw(shift(A) * scale(2., 2.)*unitcircle);  draw(shift((5.,6.)) * scale(3.000060969351735, 3.000060969351735)*unitcircle);  draw((xmin, 1.3333333333333333*xmin-0.6666666666666666)--(xmax, 1.3333333333333333*xmax-0.6666666666666666)); /* line */ draw((2.,ymin)--(2.,ymax)); /* line */ draw((5.,ymin)--(5.,ymax)); /* line */ draw((xmin, 1.6666869897839114*xmin + 0.6666260204321771)--(xmax, 1.6666869897839114*xmax + 0.6666260204321771)); /* line */ draw(O--F, qqzzff);  draw(F--A, ffwwqq);   /* dots and labels */ dot(O,blue);  label("$O$", (0.08696973475182286,0.23426871275979863), NE * labelscalefactor,blue);  dot(A,blue);  label("$A$", (2.089474351594523,2.23677332960249), NE * labelscalefactor,blue);  dot((5.,6.),blue);  label("$A'$", (5.093231276858573,6.2190268290055695), NE * labelscalefactor,blue);  dot(B,xdxdff);  label("$B$", (2.089474351594523,0.23426871275979863), NE * labelscalefactor,xdxdff);  label("$c$", (0.9971991060439592,3.2607813723061394), NE * labelscalefactor);  dot(C,xdxdff);  label("$C$", (3.2955282685566036,3.829674729363722), NE * labelscalefactor,xdxdff);  label("$d$", (3.477574142815031,8.107752774436745), NE * labelscalefactor);  label("$a$", (7.255026033677397,9.404829628528034), NE * labelscalefactor);  label("$b$", (2.1804972887237364,9.404829628528034), NE * labelscalefactor);  label("$e$", (4.615360856930201,9.404829628528034), NE * labelscalefactor);  dot(D,linewidth(3.pt) + uuuuuu);  /* Solution by adihaya */ label("$D$", (2.089474351594523,4.125499275033665), NE * labelscalefactor,uuuuuu);  dot((5.,9.000060969351734),linewidth(3.pt) + uuuuuu);  label("$E$", (5.093231276858573,9.131760817140394), NE * labelscalefactor,uuuuuu);  label("$f$", (4.933941136882449,9.404829628528034), NE * labelscalefactor);  dot(F,linewidth(3.pt) + uuuuuu);  label("$\Large{(-4,-6)}$", (-3.73599362467515,-6.273871291978948), NE * labelscalefactor,uuuuuu);  label("$\Large{2\sqrt{13}}$", (-2.916787190512227,-2.0868161840351394), NE * labelscalefactor,qqzzff);  dot(G,linewidth(3.pt) + uuuuuu);  label("$G$", (-3.9180394989335774,-5.864268074897489), NE * labelscalefactor,uuuuuu);  label("$\Large{10}$", (0.2690156090102501,-0.6759606585323339), NE * labelscalefactor,ffwwqq);  clip((xmin,ymin)--(xmin,ymax)--(xmax,ymax)--(xmax,ymin)--cycle);   /* re-scale y/x */ currentpicture = yscale(0.9090909090909091) * currentpicture;   /* end of picture */[/asy] Using analytic geometry, we find that the center of dilation is at $(-4,-6)$ and the coefficient/factor is $1.5$. Then, we see that the origin is $2\sqrt{13}$ from the center, and will be $1.5 \times 2\sqrt{13} = 3\sqrt{13}$ from it afterwards.

Thus, it will move $3\sqrt{13} - 2\sqrt{13} = \boxed{\sqrt{13}}$.

Solution 3: Logic and Geometry

Using the ratios of radii of the circles, $\frac{3}{2}$, we find that the scale factor is $1.5$. If the origin had not moved, this indicates that the center of the circle would be $(3,3)$, simply because of $(2 \cdot 1.5,  2 \cdot 1.5)$. Since the center has moved from $(3,3)$ to $(5,6)$, we apply the distance formula and get: $\sqrt{(6-3)^2 + (5-3)^2} = \boxed{\sqrt{13}}$.

Solution 4: Simple and Practical

Start with the size transformation. Transforming the circle from $r=2$ to $r=3$ would mean the origin point now transforms into the point $(-1,-1)$. Now apply the position shift: $3$ to the right and $4$ up. This gets you the point $(2,3)$. Now simply apply the Pythagorean theorem with the points $(0,0)$ and $(2,3)$ to find the requested distance.

Solution 5: Using the Axes

Before dilation, notice that the two axes are tangent to the circle with center $(2,2)$. Using this, we can draw new axes tangent to the radius 3 circle with center $(5,6)$, resulting in a "new origin" that is 3 units left and 3 units down from the center $(5,6)$, or $(2,3)$. Using the distance formula, the distance from $(0,0)$ and $(2,3)$ is $\boxed{\sqrt{13}}$. ~Mightyeagle

Solution 6: Geometry

Because the dilation changes the circle of radius 2 to a circle of radius 3, the scale factor must be $\frac{3}{2}$. The center of the circle with radius 3 is 3 units to the right and 4 units above the center of the circle with radius 2, so the center of dilation must be 6 units to the left and 8 units below the center of the radius 2 circle. So, the center of dilation is the point $(-4, -6)$. The distance from that point to the origin is $2\sqrt{13}$, and halving that to get the distance the origin moves gives $\boxed{\sqrt{13}}$. ~Meeshbot

See Also

2016 AMC 10B (ProblemsAnswer KeyResources)
Preceded by
Problem 19
Followed by
Problem 21
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
All AMC 10 Problems and Solutions

The problems on this page are copyrighted by the Mathematical Association of America's American Mathematics Competitions. AMC logo.png